Advertisement

HomeAcademics & ActivitiesLearning Activities

Trash to treasure: The eco-art of homemade paper

Page 2 of 2

By GreatSchools Staff

How to do it

Reuse old scraps to make paper from scratch and, in the process, add homemade flair.

  1. Tear several paper towels into strips, and put them in a blender three-quarters full of water. Add any optional materials to give your paper a unique color or scent and blend on high for about a minute (the longer you blend, the shorter the fibers will become).
  2. Pour the mixture into your tub. Repeat until you have at least a couple inches of pulp. Stir the mixture.
  3. Fit the deckle (the open hoop) over the mold (the netted hoop), sandwiching the netting in between. Dip the mold and deckle into the tub with the screen facing up. Scoop up a layer of pulp, making sure to hold the deckle steady on the mold. Holding the deckle and mold parallel to the basin, lift them quickly several times to shake out excess water.
  4. Remove the deckle, cover the mold with a piece of wax paper and turn it over onto a flat surface. Soak up excess water with your sponge through the screen.
  5. Allow the paper to dry completely (usually overnight). You can speed up the process and make your paper flat by pressing it onto a sunny window and peeling off the wax paper.

How to make a mold and deckle

What you’ll need

  • Two small embroidery hoops
  • Nylon window screen

How to do it

Cut a piece of screening at least two inches larger all around than your hoops. Separate the two parts of one of the hoops and stretch the screen over the inner one tightly. Secure it with the outer hoop, just as you would a piece of fabric for embroidering. This hoop is now the mold, and the unscreened hoop is the deckle.

Adapted from an activity designed by Dr. Fred Stein, a science educator at the Exploratorium Institute for Inquiry, a national science-education-reform project based in San Francisco.


ADVERTISEMENT
ADVERTISEMENT